BIS ISI强制类产品清单 |
updated: 2021-03-30 |
Sr No. | IS No. | Product | For Notification Details pl. click on the given link |
Cement/ 水泥 |
1 | IS 12330 | Sulphate Resisting Portland Cement
抗硫酸盐硅酸盐水泥 | Cement (Quality Control)Order, 2003 |
2 | IS 12600 | Low heat Portland Cement
低热硅酸盐水泥 |
3 | IS 1489 (Part 1) | Portland Pozzolana Cement-Part1 Fly-ash based
火山灰硅酸盐水泥 - 粉煤灰基 |
4 | IS 1489 (Part 2) | Portland Pozzolana Cement-Part 2 Calcined clay based
火山灰硅酸盐水泥 - 煅烧粘土基 |
5 | IS 269 | Ordinary Portland Cement
普通硅酸盐水泥 |
6 | IS 3466 | Masonry Cement
砌体水泥 |
7 | IS 455 | Portland Slag Cement
矿渣硅酸盐水泥 |
8 | IS 6452 | High Alumina Cement for Structural use
结构用高铝水泥 |
9 | IS 6909 | Super sulphated cement
超硫酸盐水泥 |
10 | IS 8041 | Rapid hardening Portland cement
快硬硅酸盐水泥 |
11 | IS 8042 | White Portland Cement
白色硅酸盐水泥 |
12 | IS 8043 | Hydrophobic Portland Cement
疏水硅酸盐水泥 |
13 | IS 8229 | Oil well Cement
油井水泥 |
14 | IS 16415: 2015 | Composite Cement- Specification.
复合水泥 |
15 | IS 16993: 2018 | Microfine Ordinary Portland Cement- Specification.
超细普通硅酸盐水泥 |
16 | IS 15895: 2018 | High Alumina Refractory Cement
高铝质耐火水泥 |
|
Household Electrical goods /家用电器产品 |
17 | IS 12640 (Part 1) | Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs)
剩余电流动作断路器---不带过流保护的断路器 | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003 |
18 | IS 12640 (Part 2) | Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs)
剩余电流动作断路器---带过流保护的断路器 |
19 | IS 13010 | AC watt-hour meters, class 0.5, 1 & 2
电表- class 0.5, 1 & 2 |
20 | IS 13779 | AC static watt-hour meters, class 1 & 2
电表- class 1 & 2 |
21 | IS 14697 | AC static transformer operated watt-hour and VAR-hour meters,
class 0.2S & 0.5S
电表 |
22 | IS 15111 (Part 1 & 2) | Self Ballasted Lamps for General Lighting Services – Part 1 :
Safety Requirements & Part 2 : Performance Requirements
自镇流灯 |
23 | IS 302 (Part 2/Sec 3) | Safety of household and similar electrical appliances – Electric iron
电熨斗 |
24 | IS 302 (Part 2/Sec 201) | Safety of household and similar electrical appliances– Electric immersion water-heaters
浸没式电热水器 |
25 | IS 302 (Part 2/Sec 202) | Safety of household and similar electrical appliances –Electric stoves
电炉 |
26 | IS 302 (Part 2/Sec 30) | Safety of household and similar electrical appliances-Room heaters
室内加热器 |
27 | IS 3854 | Switches for domestic and similar purposes
开关 |
28 | IS 418 | Tungsten filament general service electric lamps (upto100 W )
钨丝通用电灯（小于100w) |
29 | IS 694 | PVC insulated cables for working voltages up to and including 1100V
小于1100V的PVC绝缘电线 |
30 | IS 8828 * | Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations
过流保护开关 |
31 | IS 9968 (Part 1) | Elastomer insulated cables (Part.1): For working voltages up to and including1100 V
小于1100V 弹性体绝缘电缆 |
Batteries |
32 | IS 8144 | Multi-Purpose dry batteries
干电池 |
|
Food & Related Products |
33 | IS 15757 | Follow–up formula –complimentary foods
后续配方-辅助食品 |
|
34 | IS 11536 | Processed cereal based complementary foods
加工谷物类辅助食品 |
|
35 | IS 1165 | Milk-powder
牛奶粉 |
|
36 | IS 1166 | Condensed milk, partly skimmed and skimmed condensed milk
炼乳，部分脱脂和脱脂炼乳 |
|
37 | IS 12176 | Sweetened ultra high temperature treated condensed milk
加糖超高温炼乳 |
|
38 | IS 13334 (Part 1) | Skimmed milk-powder, standard grade
脱脂奶粉，标准等级 |
|
39 | IS 13334 (Part 2) | Skimmed milk-powder, extra grade
脱脂奶粉，特级 |
|
40 | IS 13428 | Packaged Natural Mineral Water
包装的天然矿泉水 |
|
41 | IS 14433 | Infant milk substitutes
婴儿牛奶替代品 |
|
42 | IS 14542 | Partly skimmed milk powder
部分脱脂奶粉 |
|
43 | IS 14543 | Packaged Drinking Water (Other than Packaged Natural Mineral Water)
包装的饮用水 |
|
44 | IS 1656 | Milk-cereal based weaning foods
基于牛奶谷物的断奶食品 |
|
45 | IS 3470 | Hexane, Food grade
己烷，食品级 |
|
46 | IS 14625 | Plastic Feeding Bottles
塑料奶瓶 |
|
47 | IS 5168 | Glass Feeding Bottles
玻璃奶瓶 |
|
Oil Pressure Stoves /油压炉 |
48 | IS 10109 | Oil pressure stove, offset burner type
油压炉，偏置燃烧器类型 |
|
49 | IS 2787 | Multi-burner oil pressure stoves
多燃烧器油压炉 |
|
50 | IS 1342 | Oil pressure stoves
油压炉 |
|
Automobile Accessories/ 汽车配件 |
51 | IS 13098 | Automotive vehicles –Tubes for pneumatic tyres
汽车–充气轮胎管 |
|
52 | IS 15627 | Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles
机动车–两轮和三轮机动车充气轮胎 |
|
53 | IS 15633 | Automotive vehicles-Pneumatic tyres for passenger car vehicles– Diagonal and radial ply
汽车-乘用车充气轮胎-对角线和子午线层 |
|
54 | IS 15636 | Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply
汽车-商用车充气轮胎-对角线和子午线层 |
|
Cylinder, Valves and Regulation/ 气缸，阀门和调节 |
55 | IS 14899 | Liquefied petroleum gas containers for automotive use
汽车用液化石油气容器 |
|
56 | IS 15100 | Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use
用于汽车的永久固定式液化石油气（LPG）容器的多功能阀组件 |
|
57 | IS 3196 (Part 4) | Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases
超过5升低压可液化气体的水容量的焊接的低碳钢瓶 - 有毒和腐蚀性气体的气瓶 |
|
58 | IS 3196 (Part 1) | Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG)
水容量超过5升，用于低压可液化气体的焊接的低碳钢气瓶 - 液化石油气瓶（LPG） |
|
59 | IS 3196 (Part 2) | Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG.
水容量超过5升，用于低压可液化气体的焊接的低碳钢气瓶 - 液化石油气以外的其他液化气瓶 |
|
60 | IS 3224 | Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders
压缩气瓶的阀配件，不包括液化石油气瓶 |
|
61 | IS 3745 | Yoke Type Valve Connection for Small Medical Gas Cylinders
轭型阀连接的小型医用气瓶 |
|
62 | IS 7142 | Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity
用于不超过5升水的低压可液化气体焊接的低碳钢瓶 |
|
63 | IS 7285 (Part 1) | Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders
可填充无缝钢气瓶 -正火钢瓶 |
|
64 | IS 7285 (Part 2) | Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2)
可填充无缝钢气瓶-
拉伸强度小于1100 MPa（112 kgf / mm2）的调质钢瓶 |
|
65 | IS 7302 | Valve fittings for gas cylinder valves for use with breathing apparatus
呼吸器用气瓶阀的阀配件 |
|
66 | IS 7312 | Welded and seamless steel dissolved acetylene gas cylinders
焊接和无缝钢溶解乙炔气瓶 |
|
67 | IS 8737 | Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders
阀门配件，用于水容量大于5升的液化石油气钢瓶 - 新型LPG气瓶的气门嘴 |
|
68 | IS 8776 | Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity
阀门配件，用于液化石油气（LPG）气瓶，最高至（包括5升）水容量 |
|
69 | IS 9798 | Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures
用于液化石油气（LPG）混合物的低压调节器 |
|
Medical Equipment / 医疗产品 |
70 | IS 3055 (Part 1) | Clinical thermometers :Part1 Solid stem type
医用温度计 |
|
71 | IS 3055 (Part 2) | Clinical thermometers :Part 2 Enclosed scale type |
|
72 | IS 7620 (Part 1) | Diagnostic Medical X-Ray Equipment
医用X射线诊断设备 |
|
Steel Products / 钢材产品 |
73 | IS 1785 (Part 1) : 1983 | Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire
预应力混凝土用普通硬拉钢丝 - 冷拔应力消除线 |
|
74 | IS 1785 (Part 2) : 1983 | Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire
预应力混凝土用普通硬拉钢丝 - 作为拉丝 |
|
75 | IS 6003:2010 | Indented wire for Pre-stressed concrete
预应力混凝土用压线 |
|
76 | IS 6006:2014 | Uncoated stress relieved strand for Pre-stressed concrete.
用于预应力混凝土的无涂层应力消除绞线 |
|
77 | IS 13620:1993 | Fusion bonded epoxy coated reinforcing bars
熔融粘合环氧涂层钢筋 |
|
78 | IS 14268:1995 | Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete.
预应力混凝土的无涂层应力消除低松弛七层绞股 |
|
79 | IS 277:2003 | Galvanized steel sheets ( plain and corrugated).
镀锌钢板 |
|
80 | IS 2002:2009 | Steel plates for pressure vessels for intermediate and high temperature service including boilers.
用于锅炉在内的中高温服务压力容器用钢板 |
|
81 | IS 2041:2009 | Steel plates for pressure vessels used at moderate and low temperature
中低温用压力容器用钢板 |
|
82 | IS 2830:2012 | Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose
碳素钢铸坯，锭，方坯和方坯，用于再轧制成一般结构用钢 |
|
83 | IS 1786:2008 | High strength deformed steel bars and wires for concrete reinforcement
高强度变形钢筋混凝土用钢筋 |
|
84 | IS 648:2006 | Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)
冷轧无取向电工钢板- 带钢加工型 |
|
85 | IS 3024:2015 | Grain oriented electrical steel sheet & strip (CRGO)
取向电工钢带 |
|
86 | IS 15391:2003 | Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification.
定向电工钢带 |
|
87 | IS 2062:2011 | Hot rolled medium and high tensile structural steel
热轧中高强度结构钢 |
|
88 | IS 432 : Part 1:1982 | Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars
用于混凝土增强的低碳钢和中度拉伸钢筋和硬拉钢丝 - 低碳钢和中强度钢 |
|
89 | IS 432 : Part 2:1982 | Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire
低碳钢和中拉钢筋和用于混凝土增强的硬拉钢丝 - 硬拉钢丝 |
|
90 | IS 513 (Part-1): 2016 | Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose
冷还原碳钢板和钢带 -冷成型和拉伸目的 |
|
91 | IS 432 : Part 2 : 1982 | Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel
冷还原碳钢板和钢带 - 高强度多相钢 |
|
92 | IS 1079: 2017 | Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification
热轧碳钢板，板带 |
|
93 | IS 1875:1992 | Carbon steel billets, blooms, slabs and bars for forgings.
碳素钢坯，大方坯，铸坯和棒材 |
|
94 | IS 2879:1998 | Mild steel for metal arc welding electrodes.
金属电弧焊用低碳钢 |
|
95 | IS 3502:2009 | Steel Chequered Plates
钢格板 |
|
96 | IS 5872:1990 | Cold Rolled Steel Strips (Box Strappings).
冷轧钢带 |
|
97 | IS 5986: 2017 | Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification.
用于成型和翻边目的的热轧钢板，钢板和钢带 |
|
98 | IS 6240:2008 | Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
用于制造低压液化气瓶的热轧钢板（最大6毫米） |
|
99 | IS 7283:1992 | Hot Rolled bars for production of bright bars and machined parts for engineering applications.
用于生产光亮棒材和机械零件和用于工程应用热轧棒材， |
|
100 | IS 7887:1992 | Mild steel wire rods for general engineering purposes.
一般工程用低碳钢丝 |
|
101 | IS 10748:2004 | Hot Rolled Steel Strip for Welded Tubes and Pipes.
焊接管用热轧钢带 |
|
102 | IS 11513:2017 | Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification
冷轧用热轧碳钢带 |
|
103 | IS 15647:2006 | Hot rolled steel narrow width strip for welded tubes and pipes
焊接管用热轧钢窄带 |
|
104 | IS 7904:2017 | High carbon steel wire rods- Specification
高碳钢线材 |
|
105 | IS 14246:2013 | Continuously pre-painted galvanized steel sheets and coils
连续预涂镀锌钢板和卷材 |
|
106 | IS 15965:2012 | Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain).
彩涂铝锌合金金属涂层钢带和钢板 |
|
107 | IS 280: 2006 | Mild steel wire for General Engineering purposes.
通用工程用低碳钢丝 |
|
108 | IS 1835:1976 | Round Steel wire for ropes
圆钢丝绳 |
|
109 | IS 3975:1999 | Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables
低碳镀锌钢丝形成的电缆和铠装带 |
|
110 | IS 4368:1967 | Alloy Steel billets, blooms and slabs for forging for general engineering purposes.
通用工程锻造用合金钢坯，大方坯和板坯 |
|
111 | IS 4454 (Part 1) : 2001 | Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire.
机械弹簧用钢丝零件 - 冷拔非合金钢丝 |
|
112 | IS 4454 (Part 2): 2001 | Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire.
机械弹簧用钢丝 - 油淬火回火钢丝 |
|
113 | IS 4824:2006 | Bead Wires for Tyres
轮胎胎圈钢丝 |
|
114 | IS 11169 (Part 1): 1984 | Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels
冷挤压用钢零件 - 锻碳和低合金钢 |
|
115 | IS 11587:1986 | Structural Weather resistant steel.
结构耐候钢 |
|
116 | IS 15103: 2002 | Fire resistant Steel- Specification
耐火钢 |
|
117 | IS 15914:2011 | High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder.
高抗拉强度平板轧制钢板（最大6 mm），用于制造焊接气瓶的薄钢板和钢带 |
|
118 | IS 15961:2012 | Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain)
热浸铝-锌合金金属涂层钢带和钢板 |
|
119 | IS 15962:2012 | Structural Steel for Building for Structures with improved seismic Resistance
具有增强的抗震性的建筑用结构钢 |
|
120 | IS 6527:1995 | Stainless Steel wire Rod
不锈钢线材 |
|
121 | IS 6528:1995 | Stainless Steel Wires
不锈钢丝 |
|
122 | IS 6603:2001 | Stainless Steel Bars and Flats
不锈钢扁钢 |
|
123 | IS 5522:2014 | Stainless Steel sheets and strips for utensils- Specification
餐具用不锈钢板条 |
|
124 | IS 6911:2017 | Stainless Steel Plate, Sheet and Strip- Specification
不锈钢板，片和带 |
|
125 | IS 15997:2012 | Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification
餐具和厨房用低镍奥氏体不锈钢薄带 |
|
126 | IS 1110 : 1990 | Ferrosilicon – Specification
硅铁 |
|
127 | IS 4409 : 1973 | Specification for Ferronickel
镍铁 |
|
128 | IS 1029 : 1970 | Specification for Hot rolled steel strip (bailing)
热轧钢带 |
|
129 | IS 2385 : 1977 | Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate
冷轧马口铁和冷轧黑钢板卷用热轧低碳钢板和带钢 |
|
130 | IS 3039 : 1988 | Specification for Structural steel for construction of hulls of ships
船舶船体结构钢 |
|
131 | IS 9550 2001 | Bright steel bars – v Specification
光亮的钢筋 |
|
132 | IS 3748 : 1990 | Tool and die steels – Specification
工具钢和模具钢 |
|
133 | IS 5517 : 1993 | Steel for hardening and tempering – Specification
淬火和回火用钢 |
|
134 | IS 7291 : 1981 | Specification for High speed tool steels
高速工具钢 |
|
135 | IS 7494 : 1981 | Specification for Steel for valves for internal combustion engines
内燃机气门用钢 |
|
136 | IS 12146 : 1987 | Specification for Carbon manganese steel forgings for pressure vessels
压力容器用碳锰钢锻件 |
|
137 | IS 16585 : 2016 | Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.
磁性材料–每种材料的规范–半加工状态下交付的铁基非晶带 |
|
138 | IS 2831 : 2012 | Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification
碳素钢铸坯，方坯，大方坯和板坯，用于重新轧制成结构钢 |
|
139 | IS 1148: 2009 | Steel Rivet Bars (medium And High Tensile) – For Structural Purposes
钢铆钉棒（中高强度） |
|
140 | IS 1673: 1984 | Specification for Mild Steel Wire, Cold Heading Quality
低碳钢丝 |
|
141 | IS 1812: 1982 | Specification for Carbon Steel Wire for the Manufacture of Wood Screws
用于制造木螺钉的碳钢丝 |
|
142 | IS 2507: 1975 | Specification for Cold – rolled Steel Strips For Springs.
弹簧冷轧钢带 |
|
143 | IS 2255: 1977 | Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process).
用于制造机械螺钉的低碳钢盘条 |
|
144 | IS 3195: 1992 | Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification .
用于制造蜗壳和螺旋弹簧的钢 |
|
145 | IS 3431: 1982 | Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension.
用于制造汽车悬架的蜗壳，螺旋弹簧和层压弹簧的钢 |
|
146 | IS 3885-Part-1: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification.
用于制造叠层弹簧的钢 |
|
147 | IS 3885-Part- 2: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification.
用于制造叠层弹簧的钢 |
|
148 | IS 4223: 1975 | Specification for Steel Wire for Umbrella Ribs .
伞肋用钢丝 |
|
149 | IS 4224: 1972 | Specification for Steel Wire for Staples, Pins And Clips.
订书钉，别针和夹子的钢丝 |
|
150 | IS 4397: 1999 | Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification.
球笼和保持架/保持架用冷轧碳钢带 |
|
151 | IS 4398: 1994 | Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification
用于球，滚子和轴承座圈制造的碳铬钢 |
|
152 | IS 6902: 1973 | Specification for Steel Wire for spokes.
辐条钢丝 |
|
153 | IS 6967: 1973 | Specification for Steel For Electrically welded round Link Chains.
圆形链节电焊接用钢 |
|
154 | IS 7226: 1974 | Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes.
一般工程用途的冷轧中，高碳和低合金钢带 |
|
155 | IS 7557: 1982 | Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets.
钢丝：（最大20毫米）用于制造冷锻铆钉 |
|
156 | IS 8052: 2006 | Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification.
用于一般工程应用的弹簧，铆钉和螺钉生产的钢锭，钢坯和大方坯 |
|
157 | IS 8951: 2001 | Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification
高碳钢线材生产用铸钢坯锭，方坯和大方坯 |
|
158 | IS 8952: 1995 | Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification
用于一般工程目的的软钢生产的钢锭，大方坯和方坯 |
|
159 | IS 9476: 1980 | Specification for Cold rolled steel strips for carbon steel razor blades.
碳钢剃须刀片用冷轧钢带 |
|
160 | IS 9962: 1981 | Specification for Steel Wire for Needles.
针用钢丝 |
|
161 |
IS 12367:1988
| Specification for Cold-rolled Carbon Steel Strips/ Coils for Manufacture of Welded Tubes.
焊接管用冷轧碳钢带/卷 |
|
162 | IS 14331:1995 | Steels for High Temperature Bolting Applications – Specification
高温螺栓用钢 |
|
163 |
IS 14491:1997
| Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification
低碳高强度冷轧钢板和冷弯卷 |
|
164 |
IS 14650:1999
| Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification
用于再轧目的的碳素钢铸锭，方坯，大方坯和板坯 |
|
165 |
IS 4882: 1979
| Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry
用于轴承行业的铆钉用低碳钢丝 |
|
166 | IS 2090:1983 | Specification for High Tensile Steel Bars used in Pre-stressed Concrete
预应力混凝土用高强度钢筋 |
|
167 |
IS 6529:1996
| Stainless Steel Blooms Billets And Slabs For Forging
不锈钢大方坯锻造方坯和板坯 |
|
168 |
IS 9294:1979
| Cold-Rolled Stainless Steel Strips for Razor Blades
刀片用冷轧不锈钢带 |
|
169 |
IS 10631:1983
| Stainless Steel for welding electrode core wire
焊接电极芯线用不锈钢 |
|
170 |
IS 10631 (Part 2):1983
| Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire.
电气用非磁性不锈钢---绑线 |
|
171 | IS 10631 (Part 3):1983 | Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates.
电气用非磁性不锈钢 |
|
172 | IS 11169 (Part 2): 1989 | Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel 不锈钢 |
|
173 | IS 5651:1987 | Steels for Pneumatic Tools
气动工具钢 |
|
174 | IS 9516:1980 | Heat Resisting Steels
耐热钢 |
|
175 | IS 11952:1986 | Steels For Piston Pins (Gudgeon Pins)
活塞销用钢 |
|
176 | IS 12045:1987 | Alloys Used in Electrical Resistance Metallic Heating Elements
电阻金属加热元件中使用的合金 |
|
177 | IS 14652:1999 | 18 Percent Nickel Maraging Steel Bars and Rods
18％镍马氏体时效钢棒 |
|
178 | IS 1566:1982 | Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement
钢筋混凝土用硬拉钢丝织物 |
|
179 |
IS 5489: 1975
| Carburizing Steels For Use in Bearing Industry.
用于轴承行业的渗碳钢 |
|
180 |
IS 11946:1987
| Soft Magnetic Iron Strips
软磁性铁条 |
|
181 |
IS 11947:1987
| Soft Magnetic Iron Rods, Bars Flats and Sections
软磁性铁棒，扁钢和型材 |
|
182 | IS 963: 1958 | Chrome molybdenum steel bars and rods for aircraft purposes
飞机用铬钼钢棒 |
|
183 | IS 4454 (Part 4): 2001 | Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire
机械弹簧用钢丝- 不锈钢丝 |
|
184 | IS 1993 : 2018 | Cold-reduced Electrolytic Tin Plate
冷 原电解镀锡板 |
|
185 | IS 12591:2018 | Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel 冷还原电解铬/氧化铬涂层钢 |
|
186 | IS 412:1975 | Expanded Metal Steel Sheets For General Purposes
通用钢板 |
|
187 | IS 2100: 1970 | Steel Billets,Bars And Sections For Boilers
锅炉用钢坯、棒材和型钢 |
|
188 | IS 2589: 1975 | Hard Drawn Steel Wire For Upholstery Springs
软垫弹簧用冷拔钢丝 |
|
189 | IS 3298: 1981 | Mild Steel Rivet Bars For Ship Building
造船用低碳钢铆钉条 |
|
190 | IS 4072: 1975 | Steel For Spring Washers
弹簧垫圈用钢 |
|
191 | IS 8510 (Part II): 1977 | Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires
电枢和转子捆扎用钢丝第二部分磁性捆扎线的特殊要求 |
|
192 | IS 8510 (PartIII): 1977 | Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires
电枢和转子捆扎用镀锡钢丝第三部分非磁性捆扎线的特殊要求 |
|
193 | IS 8563: 1977 | Half Round Mild Steel Wire For The Manufacture of Split Pins
制造开口销用半圆形低碳钢丝 |
|
194 | IS 8564: 1977 | Steel Wire For Nipples For Spokes
辐条螺纹接头用钢丝 |
|
195 | IS 8565: 1977 | Heald Wire
综丝 |
|
196 | IS 8566: 1977 | Steel Wire For Reeds
芦苇用钢丝 |
|
197 | IS 8917: 1978 | Plates For Galvanizing Pots
镀锌锅板 |
|
198 | IS 9442: 1980 | Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs
农用圆盘制造用热轧钢板和钢带 |
|
199 | IS 9485: 1980 | Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling
搪瓷用冷轧和热轧碳素钢板 |
|
200 | IS 10794: 1984 | Mild steel wire for cotter pins
开口销用低碳钢丝 |
|
201 | IS 12262:1988 | Trapezoidal Steel Wire For Springs Washers
弹簧垫圈用梯形钢丝 |
|
202 | IS 12313: 1988 | Hot-Dip Terne Coated Carbon Steel Sheets
热浸镀镀碳钢板 |
|
203 | IS 15911:2010 | Structural Steel (Ordinary Quality)
结构钢 |
|
204 | IS 4430: 1979 | Mould Steels
模具钢 |
|
205 | IS 4431: 1978 | Carbon And Carbon- Manganese Free- Cutting Steels
碳和碳锰易切削钢 |
|
206 | IS 4432: 1988 | Case Hardening Steels/表面硬化钢 |
|
207 | IS 5518: 1996 | Steels For Die Blocks For Drop Forging
模锻模架用钢 |
|
208 | IS 8748: 1978 | Forged/Rolled CTC Segments
锻造/轧制CTC段 |
|
209 | IS 12145: 1987 | Quenched And Tempered Alloy Steel Forgings For Pressure Vessels
压力容器用调质合金钢锻件 |
|
210 | IS 13387: 1992 | Tool Steel Forgings For Metal Forming
金属成形用工具钢锻件 |
|
211 | IS 14698:1999 | Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services
防务用壳体和防弹弹用碳素钢和低合金钢坯、钢坯、板坯和棒材 |
|
212 |
IS/ISO 11951 : 2016
| Cold – Reduced tinmill products – Blackplate
冷还原锡板厂产品-黑板 |
|
213 | IS 3930: 1994 | Flame And Induction Hardening Steels
火焰淬火钢和感应淬火钢 |
|
214 | IS 5478: 1969 | Thermostat Metal Sheet and Strip
恒温器金属薄板和带材 |
|
215 | IS 13352: 1992 | Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs
由连铸坯、钢坯和板坯生产的锻件用坯料 |
|
216 | IS 16644: 2018 | Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete
预应力混凝土用应力消除低松弛钢丝 |
|
217 | IS 8329 : 2000 | Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage
离心铸造（旋压）球墨铸铁水、气和污水压力管 |
|
218 | IS 9523:2000 | Ductile iron fittings for pressure pipes for water, gas and sewage
水、气和污水压力管用球墨铸铁配件 |
|
219 | IS 1161:2014 | Steel tubes for structural purposes/ 结构用钢管 |
|
220 | IS 1239 (Part 1):2014 | Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes/ 钢管、管件和其他锻钢配件第1部分：钢管 |
|
221 |
IS 4270:2001
| Steel tubes used for water-wells (upto 200 mm dia)/ 水井用钢管（直径不超过200 mm） |
|
222 |
IS 9139:1979
| Specification for Malleable iron shots and grits for use in foundries/ 铸造厂用可锻铸铁丸和粗砂规范 |
|
Electrical Transformers / 电气变压器 |
223 | IS 1180 (Part 1) | Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed
最高2500 kVA，33 Kv的室外型油浸式配电变压器 - 浸入矿物油 |
|
Electrical Motors / 电器马达 |
224 | IS 12615 | Energy Efficient Induction Motors-Three Phase Squirrel Cage
节能感应电动机 |
|
Capacitors/ 电容 |
225 | IS 2993 | A.C. motor capacitors / AC 马达 |
|
226 | IS 13340 | Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V/ 自愈式电力电容器 |
|
227 | IS 13585 Part 1 | Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation
非自愈型并联功率电容器 |
|
Chemicals & Fertilizers/ 化学品 |
228 | IS 252:2013 | Caustic Soda -Specification
烧碱 |
|
229 | IS 10116 : 2015 | Boric Acid – Specification 硼酸 |
|
230 | IS 15573 | Poly Aluminium Chloride 聚氯化铝 |
|
231 | IS 695 | Acetic Acid 醋酸 |
|
232 | IS 2833 | Aniline 苯胺 |
|
233 | IS 517 | Methanol 甲醇 |
|
234 | IS 5158: 1987 | Specification for Phthalic Anhydride, Technical 邻苯二甲酸酐 |
|
235 | IS 8058:2018 | Pyridine 吡啶 |
|
236 | IS 16113:2013 | Gamma Picoline 伽马吡啶 |
|
237 | IS 16112:2013 | Beta Picoline β-吡啶 |
|
238 | IS 12084: 2018 | Morpholine 吗啉 |
|
239 | IS 297:2001 | Sodium Sulphide, Technical 硫化钠 |
|
240 | IS 7129:1992 | Potassium Carbonate, Anhydrous 无水碳酸钾 |
|
241 | IS 170:2004 | Acetone 丙酮 |
|
242 | IS 4581:1978 | Phosphorous Trichloride, pure and Analytical Reagent
三氯化磷纯分析试剂 |
|
243 | IS 11744:1986 | Phosphorous Pentachloride, Technical 五氯化磷 |
|
244 | IS 11657:1986 | Phosphorous Oxychloride, Technical 氯氧磷 |
|
245 | IS 2080:1980 | Stabilized Hydrogen Peroxide 稳定过氧化氢 |
|
246 | IS 3205:1984 | Precipitated Barium Carbonate, Technical 沉淀碳酸钡 |
|
247 | IS 12928:1990 | Precipitated Barium for Ceramic and Glass Industry 陶瓷和玻璃工业用沉淀钡 |
|
248 | IS 4505:2015 | Sodium Formaldehyde Sulphoxylate 甲醛亚硫酸氢钠 |
|
249 | IS 6100:1984 | Sodium Tripolyphosphate, Anhydrous, Technical
无水三聚磷酸钠 |
|
250 | IS 14709:1999 | n- Butyl Acrylate
丙烯酸丁酯 |
|
251 | IS 336:1973 | Ether
乙醚 |
252 | IS 5295:1985 | Ethylene Glycol
乙二朜 |
253 | IS 537:2011 | Toluene
甲苯 |
254 | IS 15030:2001 | Terephthalic Acid
苯二甲酸 |
255 | IS 14707: 1999 | Methyl Acrylate/ 丙烯酸甲酯 |
|
256 | IS 14708:1999 | Ethyl Acrylate/ 丙烯酸乙酯 |
|
257 | IS 12345:1988 | Vinyl Acetate Monomer/ 醋酸乙烯单体 |
|
258 | IS 4105:2020 | Styrene (Vinyl Benzene)/ 苯乙烯（乙烯基苯 |
|
259 | IS 5149:2020 | Maleic Anhydride, Technical/ 工业顺酐 |
|
260 | IS 12540:1988 | Acrylonitrile/ 丙烯腈 |
|
Kitchen Appliances/ 厨房家电 |
261 | IS 302 (Part 2/ Section 14) | Hand-held Blender 手持式搅拌机 |
|
262 | IS 4250 | Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer 家用电动食品搅拌机 |
|
Domestic Water Heaters for use with LPG / 燃气热水器 |
263 | IS 15558 | Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas 燃气热水器 |
|
Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls 空调和空调相关产品 |
264 | IS 1391 (Part-1): 2017 | Room Air Conditioners- Specification Part 1 Unitary Air Conditioners
一体机空调 |
|
265 | IS 1391 (Part-2): 2018 | Room Air Conditioners- Specification Part 2 Split Air Conditioners
分体空调 |
|
266 | IS 8148:2018 | Ducted and Package Air Conditioners 管道空调 |
|
267 | IS 11329:2018 | Finned type Heat Exchanger for Room Air Conditioner 热交换器 |
|
268 | IS 10617:2018 | Hermetic compressor
Hermetic Compressors-Specification 压缩机 |
|
269 | IS/IEC 60730 (Part 2) Section 9: 2011 | Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls
温控器 |
|
Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy 插头和插座 |
270 | IS 1293 : 2005 | Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes 插头 |
|
271 |
IS 15884:2010
| Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2) 插座 |
|
Domestic Gas Stoves for use with Liquefied Petroleum Gases 燃气灶 |
272 | IS 4246: 2002 | Domestic Gas Stoves for use with Liquefied Petroleum Gases |
|
Transparent Float Glass 透明浮法玻璃 |
273 | IS 14900: 2018 | Transparent Float Glass 透明浮法玻璃 |
|
Domestic Pressure Cooker 家用压力锅 |
274 | IS 2347:2017 | Domestic Pressure Cooker 家用压力锅 |
|
Cables 电线电缆 |
275 | IS 1554(Part 1) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V |
|
276 |
IS 1554(Part 2) : 1988
| Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 Kv |
|
277 | IS 7098 (Part 1) : 1988 | Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V |
|
278 | IS 7098 (Part 2) : 2011 | Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV |
|
279 | IS 7098 (Part 3) : 1993 | Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV |
|
280 | IS 14255 : 1995 | Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification |
|
281 | IS 9968 (Part 2) : 2002 | Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV |
|
282 |
IS 8784 : 1987
| Specification for Thermocouple Compensating Cables |
|
283 | IS 9857 : 1990 | Welding Cables – Specification |
|
284 | IS 14494 : 2019 | Elastomer Insulated Flexible Cables for Use in Mines – Specification |
|
285 | IS 2593 : 1984 | Specification for Flexible Cables for Miner’s Cap-Lamps |
|
286 | IS 5950 : 1984 | Specification for Shot Firing Cables (for use other than in shafts) |
|
287 | IS 17048 : 2018 | Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification |
|
Rubber Hose for Liquefied Petroleum Gas (LPG) 燃气橡胶管 |
288 | IS 9573(Part 1):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application |
|
289 | IS 9573(Part 2):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application. |
|
Aluminium Foil 铝箔 |
290 | IS 15392 | Aluminium and Aluminium Alloy Bare Foil for Food Packaging |
|
Toys 玩具 |
291 | IS 9873 (Part 1) : 2018 | Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties. |
|
IS 9873 (Part 2) : 2017 | Safety of Toys Part 2 Flammability. |
|
IS 9873 (Part 3) : 2017 | Safety Requirements for Toys Part 3 Migration of Certain Elements. |
|
IS 9873 (Part 4) : 2017 | Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use. |
|
IS 9873 (Part 7) : 2017 | Safety of Toys Part 7 Requirements and Test Methods for Finger Paints. |
|
IS 9873 (Part 9) : 2017 | Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products. |
|
IS 15644: 2006 | Safety of Electric Toys. |
|
Flat Transparent Sheet Glass 平板透明平板玻璃 |
292 | IS 2835 : 1987 | Flat Transparent Sheet Glass. |
|
Safety Glass 安全玻璃 |
293 | IS 2553 (Part 1):2018 | Safety Glass -Specification Part 1 Architectural, Building and General uses. |
|
294 | IS 2553 (Part 2):2019 | Safety Glass -Specification Part 2 For Road Transport . |
|
Woven Sacks 编织麻袋 |
295 | IS 14887:2014 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains |
|
296 | IS 16208:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains |
|
297 | IS 14968:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar |
|
298 | IS 14252:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand |
|
Butterfly Valves /蝶形阀 |
299 | IS 13095:1991 | Butterfly valves for general purpose |
|
Reflectors for Bicycles /自行车反光镜 |
300 | IS/ISO 6742 (Part 2):2015 | Retro-reflective Devices |
|
Paper/ 纸 |
301 | IS 14490:2018 | Plain Copier Paper/ 普通复印机纸 |
|
Cattle Feeds |
302 | IS 2052 : 2009 | Compounded Feeds for Cattle |
|
Automobile Wheel Rim Component/ 汽车轮辋组件 |
303 | IS: 16192 (Part 1) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1
Light Alloy Wheel Rims Method of Tests and Requirements
轻合金轮辋 |
|
304 | IS: 16192 (Part 2) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2
Sheet Metal Wheel Rims Method of Tests and Requirements
金属板轮辋 |
|
305 | IS: 16192 (Part 3) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3
Spoke Wheel Rims Method of Tests and Requirements
轮辐轮辋 |
|
306 | IS: 9436 | Performance Requirements and Methods of Tests for Wheels for Passenger Cars |
|
307 | IS: 9438 | Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses |
|
Foot Wear (鞋子） |
308 | IS 5557: 2004 | Industrial and protective rubber knee and ankle boots
工业和防护橡胶膝踝靴 |
|
309 | IS 5557 (Part 2): 2018 | All rubber gum boots and ankle boots
全胶靴及踝靴 |
310 | IS 5676: 1995 | Moulded solid rubber soles and heels
模压实心橡胶鞋底和鞋跟 |
311 | IS 6664: 1992 | Rubber microcellular sheets for soles and heels
鞋底和鞋跟用微孔橡胶板 |
312 | IS 6719: 1972 | Solid PVC soles and heels
实心PVC鞋底和鞋跟 |
313 | IS 6721: 1972 | PVC sandal
PVC凉鞋 |
314 | IS 10702: 1992 | Rubber Hawai Chappal |
315 | IS 11544: 1986 | Slipper, rubber
橡胶拖鞋 |
316 | IS 12254: 1993 | Polyvinyl chloride(PVC) industrial boots
PVC材料的工业靴 |
317 | IS 13893: 1994 | Polyurethane sole, semirigid
聚氨酯鞋底，半刚性 |
318 | IS 13995: 1995 | Unlined moulded rubber boots |
319 | IS 16645: 2018 | Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use
模压塑料鞋靴.一般工业用衬里或无衬里聚氨酯靴 |
320 | IS 16994: 2018 | Footwear for men and women for municipal scavenging work
市政清扫工作用男女用鞋 |
321 | IS 1989 (Part 1): 1986 | Leather safety boots and shoes for miners
矿工用皮革安全靴和鞋 |
322 | IS 1989 (Part.2): 1986 | Leather safety boots and shoes for heavy metal industries
重金属工业用皮革安全靴和鞋 |
323 | IS 3735: 1996 | Canvas Shoes Rubber Sole
帆布鞋橡胶鞋底 |
324 | IS 3736: 1995 | Canvas Boots Rubber Sole
帆布靴橡胶鞋底 |
325 | IS 3976: 2018 | Safety Rubber Canvas Boots for Miners
矿工用橡胶帆布安全靴 |
326 | IS 11226: 1993 | Leather safety footwear having direct moulded rubber sole
直接模制橡胶鞋底的皮革安全鞋 |
327 | IS 14544: 1998 | Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole 直接模制聚氯乙烯（PVC）鞋底的皮革安全鞋 |
328 | IS 15844: 2010 | Sports footwear 运动鞋 |
329 | IS 17012: 2018 | High ankle tactical boots with PU – Rubber sole PU橡胶底高踝战术靴 |
330 | IS 17037: 2018 | Antiriot shoes 防暴鞋 |
331 | IS 17043: 2018 | Derby shoes 德比鞋 |
332 | IS 15298 (Part 2): 2016 | Personal protective equipment – Part 2 Safety Footwear
个人防护设备 - P2 安全鞋 |
|
333 | IS 15298 ( Part 3) : 2019 | Personal protective equipment – Part 3 Protective Footwear
个人防护设备 - P2 劳保鞋 |
334 | IS 15298 (Part 4) : 2017 | Personal protective equipment – Part 4 Occupational Footwear
个人防护设备 - P2 职业鞋 |
Press Tool-Punches/ 冲压工具冲头 |
335 | IS 4296 (Part 1):2016 | Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank
冲压工具第1部分60度锥头直柄圆冲床 |
|
336 | IS 4296 (Part 2):2016 | Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank
第2部分圆柱头直柄或缩径柄冲头用冲压工具 |
|
337 | IS 4296 (Part 3):2016 | Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank
第3部分压制工具60度锥头缩径圆冲头 |
|
Helmet for riders of Two Wheeler Motor Vehicles/两轮车驾驶员头盔 |
338 | IS 4151: 2015 | Helmet for riders of Two Wheeler Motor Vehicles |
|
Refrigerating Appliances/ 制冷设备 |
339 | IS 1476 (Part1): 2000 | Household refrigerating appliance/家用制冷器具-Refrigerators with or without low temperature : Part 1 energy consumption and performance |
强制执行日期：2022-01-01
|
340 | IS 7872: 2018 | Freezers/冰柜 |
341 | IS 15750:2006 | Household frost – Free refrigerating appliances /家用自动除霜制冷设备– Refrigerators cooled by internal forced air circulation – Characteristics and test methods |
Centrifugally cast (Spun) iron pipes/ 离心铸铁管 |
342 | IS 1536: 2001 | Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage/ 离心铸铁（旋转）压力水管，用于水，煤气和污水 |
强制执行日期：2021-08-01
|
343 | IS 3989: 2009 | Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories/ 离心铸造（旋转）铁水龙头和承插口土壤，废水，通风和雨水管道，配件和附件 |
344 | IS 15905: 2011 | Hubless centrifugally cast (Spun) iron pipes, fittings and accessories – Spigot series/ 无轮毂离心铸造（旋压）铁管，配件及附件–刺钉系列 |
Flux Cored (Tubular) Electrodes |
345 | IS 15769:2008 | Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel |
|
Sewing Machine/ 缝纫机 |
346 | IS 15449 : Part 1 : 2004 | Household Zig-Zag Sewing Machine Head |
|
PVC Pipes and Fittings for Potable Water Supply/ 饮用水用PVC管和配件 (强制执行日期：2021-09-30） |
347 | IS 4985:2021 | Unplasticized PVC pipes for water supplies (Type-A)
供水用未塑化PVC管 |
|
348 | IS 12818:2010 | Unplasticized polyvinyl chloride (PVC-U) screen and casing pipes for bore/tubewells/ 未塑化的聚氯乙烯（PVC-U）筛管和套管，用于孔/管井 |
|
349 | IS 15778:2007 | Chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies/ 氯化聚氯乙烯（CPVC）管道，用于冷热水分配供应 |
|
350 | IS 16647:2017 | Oriented unplasticized polyvinyl chloride (PVC-O) pipes for water supply/ 定向未增塑的聚氯乙烯（PVC-O）供水管 |
|
351 | IS 10124 (Parts 1 to 13):2009 | Fabricated PVC-U fittings for potable water supplies/ 饮用水供应的PVC-U预制配件 |
|
352 | IS 7834(Parts 1 to 8):1987 | Injection moulded PVC socket fittings with solvent cementjoints for water supplies/ 带有溶剂胶结的注塑PVC插座配件用于供水 |
|
PVC Pipes and Fittings in Agriculture and in Suction and Delivery Lines of Agricultural Pumps and Rain Water Systems / 农业及农用泵和雨水系统的吸水和输水管线中的PVC管材和管件 (强制执行日期：2021-09-30） |
353 | IS 4985:2021 | Unplasticized PVC pipes for water supplies (Type-B)/ 供水用非增塑PVC管 |
|
354 | IS 12231:1987 | Unplasticized PVC pipes for use in suction and delivery lines of agricultural pump sets/ 农用泵组吸入和输送管线中使用的未增塑PVC管 |
|
355 | IS 13593:1992 | UPVC pipe fittings to be used with the UPVC pipes in thesuction and delivery lines of agricultural pumps/ UPVC管道配件，可与UPVC管道一起用于农用泵的吸入和输送管线 |
|
356 | IS 15265:2003 | Flexible PVC pipes polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps/ PVC软管，聚合物增强热塑性塑料软管，用于农用泵的吸入和输送管线 |
|
357 | IS 13592:2013 | Unplasticized polyvinyl chloride (PVC-U) pipes for soil and discharge system for inside and outside buildings including ventilation and rain water system/ 未塑化的聚氯乙烯（PVC-U）管道，用于建筑物内外的土壤和排水系统，包括通风和雨水系统 |
|
358 | IS 14735:1999 | Unplasticized polyvinyl chloride (UPVC)injection mouldedfittings for soil and waste discharge system for inside andoutside buildings including ventilation and rain water system/ 未塑化的聚氯乙烯（UPVC）注射成型配件，用于建筑物内外建筑物的土壤和废物排放系统，包括通风和雨水系统 |
|
PVC Pipes and Fittings for Drainage and Sewarage System/ 排水和排污系统用PVC管及配件 (强制执行日期：2021-09-30） |
359 | IS 9271:2004 | Unplasticized polyvinyl chloride UPVC single wall corrugated pipes for drainage/ 排水用非增塑聚氯乙烯UPVC单壁波纹管 |
|
360 | IS 15328:2003 | Unplasticized non-pressure polyvinyl chloride (PVC-U) pipes for use in underground drainage and sewerage system/ 未塑化的非压力聚氯乙烯（PVC-U）管道，用于地下排水和下水道系统 |
|
361 | IS 16098(Part 1):2013 | Structured – wall plastics piping systems for non- pressure drainage and sewerage – Specification: Part 1 Pipes andfittings with smooth external surface, Type A/ 结构化的无压力排水和排污的壁塑料管道系统规范：第1部分：光滑表面的管道和配件 |
|
